Blink Impact Resistant Enclosed Blinds - 24" x 66" Frame Kit

Blink® Enclosed Blinds
Blink Enclosed Blinds bring convenience, good looks, and the safety of cordless blinds to homeowners by seamlessly incorporating traditional blinds inside an insulated glass panel. Because Blink Enclosed Blinds are protected between glass, they stay clean and free of damage from kids, pets, and anything else that might come into contact with your doorglass. No dusting, no tangled or dangling cords, and no crimped or dented blinds. The thermally sealed tempered door glass can be used in doors to meet ENERGY STAR criteria, giving you energy savings and long-term value, too. They reduce heat loss in the winter and solar heat gain in the summer. A single-touch control lets you raise, lower and tilt the blinds to find the perfect light or privacy level.

Door Glass with Frame Kit
This door glass kit is designed to fit a wide variety of exterior doors manufactured by Therma Tru, Masonite, Jeld-Wen, PlastPro and many others. This kit can be used to either replace existing glass in a door, or to add glass to a door. This kit contains 1 insulated glass panel, 1 door glass frame set, 1 pack of specially designed screws, and 1 pack of screw covers. The door glass frame set consists of 1 inner and 1 outer powder coated aluminum frame. The outer frame has an air and water tight, factory applied seal that bonds the frame to the glass. Before ordering, ensure that the existing glass is held in place by raised molding. The guide below provides door glass and frame kit dimensions:

Replacing Glass
Door Material: Steel or Fiberglass
Door Width: 36”, 34”, and 32” (+/- 0.75”)
Door Height**: 6’8” and 7’0” (+/- 0.75”)
Door Thickness: 1.75”
Frame Kit Width: 24” (+/- 0.25”)
Frame Kit Height: 66” (+/- 0.25”)
**This kit will also work for an 8’0” door with an existing frame measuring 24”x66”.


Adding Glass
Door Material: Steel or Fiberglass
Door Width: 36”, 34”, 32” (+/- 0.75”)
Door Height*: 6’8” and 7’0” (+/- 0.75”)
Door Thickness: 1.75”
Door Panel: 6 Panel Door, 4 Panel Door, 12 Panel Door, 9 Panel Door, 3 Panel Door, and Flush Door
Door Panel Width: 23” (+/- 0.5”)
Door Panel Height: 65” (+/- 0.5”)
*This kit will work with a 6 panel, 8’0” door for adding glass.

Please consult the Measurement Guide for any questions on identifying the correct size door, side window or door glass frame kit for your entry system.

Typical Industry Names for the Kit
Full Light (6’8 Doors)
Three Quarter Light (8’0” Doors)